There’s nothing worse than getting ready for a shower only to find yourself shivering under a freezing stream of water after a few minutes.
Water heater problems can put a damper on your whole day and can make everything from the kids’ bathtime to washing dishes a hassle. But, most water heater problems can be quickly solved once you figure out what’s wrong.
Need a little help figuring out what’s causing your water heater issues?
Here are a few of the top troubleshooting tips to help you get your water heater back in working order so you can get your life back to normal.
One of the most manageable water heater problems to fix is a lack of power. Water heaters use a lot of electricity, which means they can trip their breaker.
To figure out whether this is the issue, go to your breaker box and check the water heater’s switch to make sure it hasn’t tripped. If the water heater’s breaker has tripped, flip the switch back into the “On” position.
You should also check the master switch on the water heater itself to make sure someone hasn’t shut it off.
Temperature Cutoff and Heating Assembly
Before checking your temperature cutoff and heating assembly, you should shut off the power via your breaker box.
Your water heater’s temperature cutoff shuts off the heating element to keep the water from getting too hot. If this element breaks, it could prevent the heating element from warming up the water.
The heating assembly warms the water in your tank. If it breaks, it could cause your tank to run constantly wasting power while leaving you with cold showers.
While you can check to see if these elements are working yourself, you’ll need to contact a professional to replace them.
Increase the Temperature
Finally, if your water heater is new or if you recently had it serviced, its issues may stem from the temperature being too low.
If your water heater doesn’t make the water hot enough, you’ll end up having to use more of it, which can lead to you running out of hot water faster.
Check your water heater’s temperature control and increase the temperature to your desired level. If you do increase the temperature of your water heater, remember to be careful when using hot water to avoid burning yourself.
If the temperature gauge on your water heater is already above 120 degrees, then it may have broken and you’ll have to hire someone to replace it.
Unfortunately, water heaters do not last forever. If you expended every possible option for repairing it and you’re still not getting any hot water, it may be time to consider replacing it.
If you’re looking for someone reliable in the Charlotte area to install your new water heater visit https://www.benfranklinclt.com/water-heaters-charlotte-nc/ to schedule an appointment.
Solving Water Heater Problems
Having issues with your water heater can be frustrating and hinder your ability to live your life. But, with these tips, you’ll be able to find the cause of and solve your water heater problems.
Are you looking for more life hacks and homeowner tips? We can help.
We have dozens of tips and tricks to help you keep your house up and running. Check them out today!