Most of the workplace accidents take place because of poor electrical equipment or appliances. According to a leading electrician Batemans Bay, when the proper attention and caution is given to choose, maintain and care for electrical equipment and appliances, you can eliminate or reduce the number of electrical accidents that take place in the workplace.
With this in mind, let’s look at some of the tips that can help you in preventing electrical accidents in the workplace.
1. Avoid overloaded outlets
Outlets should not be overloaded because they can easily create problems for us. It is advisable to cut down on the dependency on a particular outlet by ensuring that there are enough outlets in your workplace.
2. Avoid keeping water close to electrical equipment or appliance
Water is one of the most obvious reasons because of which we have seen electrical accidents taking place in a workplace. This is not difficult because it is common sense that one should not keep water anywhere close to electrical equipment or appliance.
However, many times it has been seen that while cleaning the workplace, it becomes difficult for an unprofessional to keep water away from electrical equipment or appliance. The best solution we can give you, in this case, is that you should opt for professional cleaning services for your workplace at regular intervals and make sure that things do not get out of hand.
3. Warning signs should not be avoided
There are many employees who take warning signs lightly, and it can create problems for us. For example, if an item makes an unusual noise or feels hot, you should immediately target with a warning that one should not use it. At the same time, let a professional handle the device while you are away from it.
4. Equipment and cords should regularly be inspected
Inspecting chords and equipment regularly will help in reporting any defects at the earliest. This will help in cutting down the replacement cost and save many from a disaster.
5. Using the right technique to unplug cords
Many people make the blunder of simply pulling the cord from a distance. This is not right because it can create an electrical accident that can be avoided. If a cord is to be unplugged, make sure that you unplug it by gripping the plug while pulling it out from the outlet.
6. Open wires and cords should be sealed
If you have noticed a wire on a cord hanging unattended, it is advisable to let an electrician know about it and make sure that the same is sealed or covered with electric tape. Leaving it as it can create an electrical accident.